AV操先,7777奇米四色成人眼影,又黄又爽又色的免费网站,久久亚洲精品成人av

Product Description



With each successive generation of Camera Link frame grabbers, BitFlow has improved the quality, flexibility, and robustness of their interfaces. Meanwhile, the Camera Link Specification has also been continuously evolving: 80-bit (10-tap) mode was added, Power over Camera Link (PoCL), new connectors, new tap formats. The Axion-CL uses the Cyton-CXP's backend: the StreamSync DMA engine and buffer manager, as well as a brand new PCIe Gen 2 interface, with DMA optimized for modern computers.


The Virtual Frame Grabber

The Axion supports up to two cameras. In dual camera mode, the board looks to Windows and application software like two completely independent frame grabbers. This simplifies the setup for multiple cameras as each camera is really treated separately. Of course, the cameras can be internally synchronized if needed, but they can also be run completely independently. The two cameras do not have to be the same resolution, frame rate, trigger mode, or even tap format.

StreamSync

The StreamSync system consists of an Acquisition Engine and a Buffer Manager. The StreamSync system is a start-from-scratch complete redesign of the acquisition and DMA parts of a frame grabber.

StreamSync Features

>> Efficient support for variable sized images with fast context switches between frames

>> Per frame control of acquisition properties (AOI specifically)

>> Hardware control of image sequencing

>> Enhanced debug capabilities

>> Efficient support for on-demand buffer allocation (Genicam model)

>> Graceful recovery from dropped packets (either on the input side or the DMA side)

PCI Express Gen 2.0 Interface

The Axion-CL has a Gen 2.0 x4 PCI Express bus interface. The Gen 2.0 PCIe bus doubles the data rate of the Gen 1.0 bus while using the same footprint and connectors. The Axion-CL is fully backwards compatible with Gen 1.0 motherboards, though the data rate will be halved.

Camera Control and I/O

Supported by a GUI camera file editing utility (CamEd), the Axion-CL can acquire fixed or variable size images and features a programmable ROI (Region Of Interest) sub-windowing capability. The board provides a full set of camera control signals (CC1, CC2, CC3, CC4) and sync inputs (LVAL, FVAL, PCLK, trigger, and encoder) for each camera connected to the board (up to two cameras can be connected). These signals are completely independent, although there are provisions for driving all cameras from a signal set up encoder/trigger signals. There is also a large number of programmable general purpose outputs and inputs that are not tied to the camera's timing.

I/O signals can be routed to/from many internal and external destinations, providing a flexible routing that is unprecedented in the industry. In addition, there are separate hardware I/O signals which can be connected to/from an external source. Finally, each CL camera has a full set of these signals which can be run independently. The Axion-CL board, as with our past interface products, supports not only simple triggering modes but also complicated, application-specific triggering and control interactions with your hardware environment.

 

Specifications

>> Camera Link 2.0 Compliant

>> Supports up to two cameras

>> Supports base, medium, full, 80-bit (10-tap) CL cameras

>> Supports CL clocks up to 85 MHz

>> Supports simultaneous capture from two 80-bit/85 MHz cameras

>> Industry standard SDR Camera Link connectors

>> Support PoCL and non-PoCL cameras

>> Support dual connector PoCL

>> Provides Safe Power, full protection from all power line faults

>> Cameras can be accurately synchronized, or can be completely independent

>> PCI Express x4 Gen 2.0 interface (also works in x8 and x16 slots)

>> Compatible with PCI Express Gen 1.0 slots

>>Separate I/O for each camera

>> Highly deterministic, low latency frame grabber to camera trigger

>>Supports simultaneous communications to all cameras

>> Windows "sees" a separate frame grabber for each camera

>> No on-board memory is needed

>> StreamSync acquisition engine optimizes synchronization between acquisition and DMA

>>StreamSync buffer manager maximize DMA channel efficiency

>> Acquire variable length frames from line scan cameras

>> Acquire image sequences well beyond the 4GB barrier

>> No frame rate limit

>> Triggers and encoders for external control of acquisition

>>Programmable signal generator for camera control (independent for each camera)

>>Quadrature encoder support including sophisticated triggering schemes

>>Encoder divider/multiplier

>>Drivers, utilities, and examples for Windows and Linux

>>Supported on both 32-bit and 64-bit platforms

>>Drivers for most 3rd party processing environments (e.g. HALCON, LabView, VisionPro, MATLAB, etc.)

>>Full GenICam support for control and capture

>>RoHS compliant


OPTIGER is specialized in the manufacture of industrial lenses designed by German 
companies.With high-precisionbi-telecentric lenses as its core products,OPTIGER’s 
products line also includes FA prime lenses,zoom lenses,etc. R&D and manufacture 
tailored to customers’requirements are available.
http://gggddd.com.cn/en

Online Message

To know more about this product, please leave your message and contact info, our staff will contact you asap.

*Email/Tel:

Message:

Verification Code:

點(diǎn)擊刷新
秋霞鲁丝片手机在线看| 欧美人与禽zozzo性伦交| 黄xxxxx| 久久自慰精品| 天堂在线中文在线| 高清无码少妇毛多水多| av播放网址| 亚洲 丝袜 另类 校园 欧美| 亚州HD熟女| 中文字幕无码久久精品色狠| 久久久蜜桃小说| 中字幕视频在线永久在线| 尤物成人网站视频| 《超大爆乳护士》在线观看| 久久午夜无码鲁丝片午夜精品| 啊啊啊好爽视频免费| 六月婷婷综合| 国产av婷婷| 丰满岳乱妇一区二区三区| 精品人妻无码一区二| 国产老太一性一交一乱在线观看| 香港三日本三级少妇三级视频| NANA无码人妻一区二区| 色婷婷亚洲Av综合| 亚洲久悠悠色悠在线播放| 亚州伦理一区| 国产在线成人综合| 精品乱码久久久| 天天干成人网| 日本极品少妇XXXXⅩ喷水| 被黑人插穴在线观看| 国产肥白大熟妇bbbb| 国产精品熟女91免费看| 国产精品天干天干在线观看| av成人免费看片| 中文字幕久久熟女蜜桃| 体育生gay脱裤子自慰| 搡农村老熟女| AV最新天堂资源在线| 精品少妇VA区一区二| 亚洲av无码一区二区三区乱子伦|